Coating Excellence Jakob Albertsen Komposit A/S
Dansk Engelsk Tysk
ftop-01.jpg
ftop-03.JPG
ftop-04.JPG
ftop-05.JPG
ftop-06.jpg
ftop-07.JPG
ftop-08.JPG
ftop-09.JPG
ftop-10.JPG
ftop-11.JPG
ftop-12.JPG
top-13.jpg
Application

Jakob Albertsen Komposit A/S will be the leading surface treatment company in Denmark delivering functional coating to the industrial sector.

Application

 

For it to be possible to coat a surface with composite, the surface must be clean, rough and free from any kind of contaminants, as these can adversely affect adhesion to the surface and thus reduce the service life of the coating. In addition, if the components to be coated have already been used, they must be cleaned several times before their surface is suitable for composite coating.  
     

The cleaning and roughening processes involve steam cleaning, immersion in dionate baths, drying in ovens and, finally, sand-blasting. These processes are followed by control measurements to ensure that all contamination from acids, salts, etc. has been removed from the surface that is to be coated. It is also necessary to check the roughness of the surface to make sure that the coating achieves the high level of adhesion that distinguishes it.

 
     
After cleaning and the final sand-blasting to the desired roughness, the application of the materials can begin. The materials are chemically hardening. Once they have been blended together, they can be applied to the component using a brush, roller or spray. Two layers are always applied, in different colours. This not only makes it possible to keep track of the progress of the second layer, but also subsequently to detect areas of wear on the coating.  
Jakob Albertsen Komposit A/S      Aasiaatvej 5B      DK-5700 Svendborg      Phone.: +45 62 20 20 58      Fax: +45 62 20 15 14      mail@jakob-albertsen.dk